Product Description

Bakery Equipment.com Stainless Steel Oven Racks

Standard Duty (18 Ga. Runner)

Single Side Load Stainless Steel For Revent Rack Single Oven

* All Stainless Steel Construction

* Runners are 18 Ga.

* Fully Mig-Welded on 1″ Seams

* Full Sheet Metal Constructed Caster Plate

* Threaded Inserts for Quick Change Caster Ability

* Frame Assembly is 1″ Square Tube

* 14 Gauge Top Channel For Rugged on/off Carrier Use

* Caster are rated at 440 lbs each

* Casters have 525 Degrees Heat Range

* Casters have a grease-less wheel bearing

* Dimensions: 28.5″W x 18″D x 71-7/8″H – “A” Lift

                       28.5″W x 18″D x 72″H – “B” Lift

                       28.5″W x 18″D x 73-1/8″H – “C” Lift

Racks are shipped “Knocked Down”, which is the most economical for shipping costs.

 * All slides welded to both sides of the rack, laid into a box with the caster’s attached to the caster plates and all hardware put into a smaller bag along with instructions on how to put together.

Racks can be shipped “Assembled” for an additional charge per rack.

 * Rack is fully assembled with all slides fully welded to the square tubing.

Racks can be shipped “All Welded/Assembled” for an additional $75 increased shipping expense Per Rack.

 * Rack is fully assembled with all slides, bolts and tork screws welded in place.

One Year Warranty on Casters

Standard Duty Racks